Changing Indexed Parameters - Siemens SINAMICS G120 Operating Instructions Manual

A.2.2

Changing indexed parameters

Changing indexed parameters
For indexed parameters, several parameter values are assigned to a parameter number. Each
of the parameter values has its own index.
Procedure
To change an indexed parameter, proceed as follows:
1. Select the parameter number.
2. Press the OK key.
3. Set the parameter index.
4. Press the OK key.
5. Set the parameter value for the selected index.
You have now changed an indexed parameter.
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
A.2 Handling the BOP 2 operator panel
Appendix
527