Firmware Version 4.5 - Siemens SINAMICS G120 Operating Instructions Manual

Appendix
A.1 New and extended functions
A.1.7

Firmware version 4.5

Table A-7 New functions and function changes in Firmware 4.5
Function
1 Support for the new Power Modules:
● PM230 IP20 FSA ... FSF
● PM230 in a push-through FSA ... FSC
2 Support for the new Power Modules:
● PM240-2 IP20 FSA
● PM240-2 in push-through FSA
3 New Control Units with PROFINET support
4 Support of the PROFIenergy profile
5 Shared device support via PROFINET
6 Write protection
7 Know-how protection
8 Adding a second command data set (CDS0 → CDS0 ... CDS1)
(All other inverters have four command data sets)
9 Position control and basic positioner
10 Support of an HTL encoder
11 Support of an SSI encoder
12 Fail-safe digital output
524
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
SINAMICS
G120 G120D
- ✓ ✓ ✓ - -
- ✓ ✓ ✓ - -
✓ ✓ - ✓ ✓ ✓
✓ ✓ - ✓ ✓ ✓
✓ ✓ - ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓
✓ - - - - -
- - - - - ✓
- - - - ✓ ✓
- - - - - ✓
- - - - ✓ ✓