Viewing Cpu Diagnostics - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Parameter
Section 3.2

Viewing CPU Diagnostics

To view CPU diagnostic information useful for troubleshooting hardware and software performance, navigate to
Diagnostics » View CPU Diagnostics . The CPU Diagnostics form appears.
10
Figure 9: CPU Diagnostics Form
1. Running Time Box 2. Total Powered Time Box 3. CPU Usage Box 4. RAM Total Box 5. RAM Free Box 6. RAM Low Watermark
Box 7. Temperature Box 8. Free Rx Bufs Box 9. Free Tx Bufs Box 10. Reload Button
This screen displays the following information:
Parameter
Running Time
Total Powered time
CPU Usage
RAM Total
Viewing CPU Diagnostics
Description
Rev C1), RSG2100, RS900G, RSG2200, RS969, RS900 (v2,
40-00-0066), RS900 (v2, 40-00-0067), , RS416 (40-00-0078),
RMC30 (v2), RS930 (40-00-0089), RS969 (v2, 40-00-0090), RS910
(40-00-0091-001 Rev A), RS920L (40-00-0102-001 Rev A), RS940G
(40-00-0097-000 Rev A), RSi80X series CPU board, RSG2300,
RS416v2, ... }
Shows the type, part number, and revision level of the hardware.
Description
Synopsis: DDDD days, HH:MM:SS
The amount of time since the device was last powered on.
Synopsis: DDDD days, HH:MM:SS
The cumulative powered up time of the device.
Synopsis: 0.0 to 100.0%
The percentage of available CPU cycles used for device operation as
measured over the last second.
Synopsis: 0 to 4294967295
Chapter 3
Device Management
1
2
3
4
5
6
7
8
9
53