Deleting An Ip Gateway - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 3
Device Management
4
Figure 43: IP Gateways
1. Destination Box 2. Subnet Box 3. Gateway Box 4. Apply Button 5. Delete Button 6. Reload Button
3. Configure the following parameter(s) as required:
Parameter
Destination
Subnet
Gateway
4. Click Apply.
Section 3.8.3

Deleting an IP Gateway

To delete an IP gateway configured on the device, do the following:
1. Navigate to Administration » Configure IP Gateways . The IP Gateways table appears.
Figure 44: IP Gateways Table
90
5
Description
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Specifies the IP address of destination network or host. For default
gateway, both the destination and subnet are 0.
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Specifies the destination IP subnet mask. For default gateway,
both the destination and subnet are 0.
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Specifies the gateway to be used to reach the destination.
RUGGEDCOM ROS
User Guide
1
2
3
6
Deleting an IP Gateway