Managing Static Vlans; Viewing A List Of Static Vlans; Adding A Static Vlan - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
4. Click Apply.
Section 5.1.5

Managing Static VLANs

The following section describes how to configure and manage static VLANs.
CONTENTS
• Section 5.1.5.1, "Viewing a List of Static VLANs"
• Section 5.1.5.2, "Adding a Static VLAN"
• Section 5.1.5.3, "Deleting a Static VLAN"
Section 5.1.5.1

Viewing a List of Static VLANs

To view a list of static VLANs, navigate to Virtual LANs » Configure Static VLANs . The Static VLANs table
appears.
Figure 85: Static VLANs Table
If a static VLAN is not listed, add the VLAN. For more information, refer to
Section 5.1.5.2

Adding a Static VLAN

To add a static VLAN, do the following:
Navigate to Virtual LANs » Configure Static VLANs . The Static VLANs table appears.
1.
Managing Static VLANs
Setup and Configuration
Section 5.1.5.2, "Adding a Static VLAN"
Chapter 5
.
145