Siemens RUGGEDCOM ROS v4.3 User Manual page 181

RUGGEDCOM ROS
User Guide
Figure 95: Port RSTP Parameters Table
2. Select an Ethernet port. The Port RSTP Parameters form appears.
10
Figure 96: Port RSTP Parameters Form
1. Port(s) Box 2. Enabled Options 3. Priority List 4. STP Cost Box 5. RSTP Cost Box 6. Edge Port List 7. Point to Point List
8. Restricted Role Box 9. Restricted TCN Box 10. Apply Button 11. Reload Button
3. Configure the following parameter(s) as required:
Parameter
Port(s)
Enabled
Configuring STP for Specific Ethernet Ports
Description
Synopsis: Any combination of numbers valid for this parameter
The port number as seen on the front plate silkscreen of the
switch (or a list of ports, if aggregated in a port trunk).
Synopsis: { Disabled, Enabled }
Default: Enabled
Chapter 5
Setup and Configuration
1
2
3
4
5
6
7
8
9
11
165