Chapter 3
Device Management
Parameter
Granted Buckets
Interval
Owner
4.
Click Apply.
Section 3.10.1.3
Deleting an RMON History Control
To delete an RMON history control, do the following:
Navigate to Ethernet Stats » Configure RMON History Controls . The RMON History Controls table
1.
appears.
Figure 50: RMON History Controls Table
2.
Select the history control from the table. The RMON History Controls form appears.
96
Description
Synopsis: 0 to 65535
The number of buckets granted for this RMON collection history.
This field is not editable.
Synopsis: 1 to 3600
Default: 1800
The number of seconds in over which the data is sampled for each
bucket. The range is 1 to 3600. The default is 1800.
Synopsis: Any 127 characters
Default: Monitor
The owner of this record. It is suggested to start this string
withword 'monitor'.
Deleting an RMON History Control
RUGGEDCOM ROS
User Guide