Viewing A List Of Static Multicast Groups; Adding A Static Multicast Group - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 5
Setup and Configuration
Section 5.8.2.5

Viewing a List of Static Multicast Groups

To view a list of static multicast groups, navigate to Multicast Filtering » Configure Static Multicast Groups .
The Static Multicast Groups table appears.
Figure 160: Static Multicast Groups Table
If a static multicast group is not listed, add the group. For more information, refer to
Static Multicast Group"
Section 5.8.2.6

Adding a Static Multicast Group

To add a static multicast group from another device, do the following:
1. Navigate to Multicast Filtering » Configure Static Multicast Groups . The Static Multicast Groups table
appears.
1
Figure 161: Static Multicast Groups Table
1. InsertRecord
2. Click InsertRecord. The Static Multicast Groups form appears.
230
.
Section 5.8.2.6, "Adding a
Viewing a List of Static Multicast Groups
RUGGEDCOM ROS
User Guide