Siemens RUGGEDCOM ROS v4.3 User Manual page 220

Chapter 5
Setup and Configuration
1
Figure 134: SNMP Security to Group Maps Table
1. InsertRecord
Click InsertRecord. The SNMP Security to Group Maps form appears.
2.
4
Figure 135: SNMP Security to Group Maps Form
1. Security Model Box 2. Name Box 3. Group Box 4. Apply Button 5. Delete Button 6. Reload Button
3. Configure the following parameter(s) as required:
Parameter
SecurityModel
Name
Group
4. Click Apply.
204
5
Description
Synopsis: { snmpV1, snmpV2c, snmpV3 }
Default: snmpV3
The Security Model that provides the name referenced in this
table.
Synopsis: Any 32 characters
The user name which is mapped by this entry to the specified
group name.
Synopsis: Any 32 characters
The group name to which the security model and name belong.
This name is used as an index to the SNMPv3 VACM Access Table.
RUGGEDCOM ROS
User Guide
1
2
3
6
Adding a Security-to-Group Map