Using The Console Interface - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 2
Using ROS
1
2
Figure 6: Elements of a Typical Screen (Example)
1. Title 2. Parameters and/or Data 3. Access Level or Alarm Notification 4. Controls
NOTE
If desired, the web interface can be disabled. For more information, refer to
Disabling the Web Interface"
Section 2.5

Using the Console Interface

The Console interface is a Graphical User Interface (GUI) organized as a series of menus. It is primarily accessible
through a serial console connection, but can also be accessed through IP services, such as a Telnet, RSH (Remote
Shell), SSH (Secure Shell) session, or SSH remote command execution.
NOTE
IP services can be restricted to control access to the device. For more information, refer to
"Configuring IP Services"
Each screen consists of a system identifier, the name of the current menu, and a command bar. Alarms are also
indicated on each screen in the upper right corner.
34
.
.
RUGGEDCOM ROS
User Guide
3
4
Section 4.5, "Enabling/
Section 3.9,
Using the Console Interface