Siemens RUGGEDCOM ROS v4.3 User Manual page 120

Chapter 3
Device Management
7
Figure 60: RMON Events Form
1. Index Box 2. Type List 3. Community Box 4. Last Time Sent Box 5. Description Box 6. Owner Box 7. Apply Button
8. Delete Button 9. View Button 10. Reload Button
3. Configure the following parameter(s) as required:
Parameter
Index
Type
Community
Last Time Sent
Description
Owner
4. Click Apply.
104
8
Description
Synopsis: 1 to 65535
Default: 3
The index of this RMON Event record.
Synopsis: { none, log, snmpTrap, logAndTrap }
Default: logAndTrap
The type of notification that the probe will make about this event.
In the case of 'log', an entry is made in the RMON Log table for
each event. In the case of snmp_trap, an SNMP trap is sent to one
or more management stations.
Synopsis: Any 31 characters
Default: public
If the SNMP trap is to be sent, it will be sent to the SNMP
community specified by this string.
Synopsis: DDDD days, HH:MM:SS
The time from last reboot at the time this event entry last
generated an event. If this entry has not generated any events,
this value will be 0.
Synopsis: Any 127 characters
Default: EV2-Rise
A comment describing this event.
Synopsis: Any 127 characters
Default: Monitor
The owner of this event record. It is suggested to start this string
withword 'monitor'.
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
9
Adding an RMON Event