Wall-Mounting Placement - Samsung CY-SWR1100 User Manual

You can mount this router on a wall. The stand, included in the package, has two wall-mount slots at the bottom. The distance
between these slots is exactly 73mm apart (about 3.24 inches). Use the template below to help you drill these holes precisely.
Also included in the packaging are two screw, which you'll need to mount this router to a wall. If you are mounting the router
on dry wall, we recommend using mollies to secure the screws in the wall.
Note: Samsung is not responsible for damages
incurred by unsecured wall-mounting hardware.
To mount the router to a wall, following these steps:
1. Determine where you want to mount the Router. Make sure that the wall is smooth, flat, dry, and sturdy. Also make sure
the location is within reach of an electrical outlet and the modem or other router you intend to connect this router to.
2. Tape the template below to the wall.
3. Drill two holes into the wall where indicated on the template. Make sure the holes are 73mm apart.
4. Remove the template from the wall.
5. Insert mollies into each hole, and then insert a screw into each mollie, leaving 3mm of its head exposed.
Note : If you have drilled a hole into a stud, you do not need to insert a mollie into that hole.
6. Position the Stand so the wall-mount slots line up with the two screws.
7. Place the wall-mount slots over the screws and slide the Router to the right until the screws fit snugly into the wall-mount
slots.
Print this page at 100% size. Cut along the dotted line, and place on the wall to drill precise spacing.
S W r u
amSung ireleSS outer Ser
W
all
' m
S anual
-m
ountIng
P 9
age