Samsung CY-SWR1100 User Manual page 23

Internet Connection Type: PPPoE (Username / Password)
Select PPPoE (Username/Password) from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide
you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software
from your computer. The software is no longer needed and will not work through a router.
You can configure the following parameters. The list continues on the next page.
Address Mode:
IP Address:
Username:
Password:
Verify Password:
Service Name:
Reconnect Mode:
Maximum Idle Time:
S W r u
amSung ireleSS outer Ser
Specify whether this Internet connection uses a Dynamic or Static IP address. PPPoE usu-
ally requires a Dynamic IP configuration.
If you selected Static IP, enter the PPPoE IP address here. This option is only available if
Static IP is selected.
Enter the PPPoE account user name here. Get this information from the IP.
Enter the PPPoE account password used here. Get this information from the IP.
Re-enter the PPPoE account password used here.
This optional field enables lets you enter a service name to identify this Internet connec-
tion.
Use the radio buttons to specify the reconnect mode. You can specify a custom schedule
or specify the On Demand or Manual option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that has been defined in the Schedules
page. To create a new schedule, click the New Schedule button to open the Schedules
page. Schedules will be discussed later.
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
' m
S anual
P 23
age