Samsung CY-SWR1100 User Manual page 25

Internet Connection Type: PPTP (Username / Password)
Select PPTP (Point-to-Point Tunneling Protocol) from the drop-down menu if your ISP uses a PPTP connection. Your ISP
will provide you with a username and password. This option is typically used for DSL. services.
You can configure the following parameters. The list continues on the next page.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP Address: Enter the PPTP Gateway IP address here.
PPTP Server IP Address:
Username:
Password:
Verify Password:
Reconnect Mode:
S W r u
amSung ireleSS outer Ser
Specify whether this Internet connection uses a Dynamic or Static IP address. PPTP usual
requires a Dynamic IP configuration.
If you selected Static IP, enter the PPTP IP address here. This option is only available if
you select Static IP.
Enter the PPTP Subnet Mask here.
Enter the PPTP Server IP address here. This is normally the same a the PPTP Gateway IP
address.
Enter the PPTP username here.
Enter the PPTP password here.
Re-enter the PPTP password here.
Use the radio buttons to specify the reconnect mode. You can specify a custom schedule
or specify the On Demand or Manual option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that has been defined in the Schedules
page. To create a new schedule, click the New Schedule button to open the Schedules
page. Schedules will be discussed later.
' m
S anual
P 25
age