Samsung CY-SWR1100 User Manual page 27

Internet Connection Type: L2TP (Username / Password)
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
You can configure the following parameters. The list continues on the next page.
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address: Enter the L2TP Gateway IP address here.
L2TP Server IP Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
Primary DNS Server:
S W r u
amSung ireleSS outer Ser
Specify whether this Internet connection uses a Dynamic or Static IP address. L2TP usual
requires a Dynamic IP configuration.
If you selected Static IP, enter the L2TP IP address here. This option is only available if
you selected Static IP.
Enter the L2TP Subnet Mask address here.
Enter the L2TP Server IP address here. This is normally the same as the PPTP Gateway IP
address.
Enter the L2TP username here.
Enter the L2TP password here.
Re-enter the L2TP password here.
Use the radio buttons to specify the reconnect mode. You can specify a custom schedule
or specify the On Demand or Manual option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that has been defined in the Schedules
page. To create a new schedule, click the New Schedule button to open the Schedules
page. Schedules will be discussed later.
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
Enter the Primary DNS IP address here.
' m
S anual
P 27
age