Samsung CY-SWR1100 User Manual page 63

IPv6 Connection Type: Auto-Configuration (Stateless/DHCPv6)
In the following section, we'll discuss the parameters you can configure when setting up an Auto-Configuration (Stateless/
DHCPv6) connection. in this connection method where the ISP assigns your IPv6 address when your router requests one
from the ISP's server. Some ISP's require you to make some settings on your side before your router can connect to the IPv6
Internet.
You can configure the following parameters:
My IPv6 Connection is:
You can configure the following parameters:
Obtain IPv6:
Use the following IPv6:
Primary DNS Server:
Secondary DNS Server:
Use this section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Ad-
dress that you use to access the Web-based management interface. If you change the LAN IPv6 Address here, you may need
to adjust your PC's network settings to access the network again. You can use DHCP-PD to acquire a IPv6 prefix for the LAN
interface.
You can configure the following parameters:
Enable DHCP PD:
LAN IPv6 Address:
LAN IPv6 Link-Local Ad-
dress:
S W r u
amSung ireleSS outer Ser
Select the IPv6 Connection Type used for this configuration here.
Select this option to obtain the DNS Server addresses automatically.
Select this option to manually enter the DNS Server addresses used.
Enter the primary DNS Server address used here.
Enter the secondary DNS Server address used here.
Select this option to enable DHCP PD.
Enter the LAN IPv6 address used here. This address must be in the '/64' subnet.
Displays the LAN IPv6 Link-Local address used here.
' m
S anual
P 63
age