Samsung CY-SWR1100 User Manual page 56

Click the Connect your Wireless Device button to start Wireless Connection Setup Wizard. This wizard helps you add
wireless devices to the wireless network.
The wizard will display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN
for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and
has a configuration button, you can add it to the network by pressing the configuration button on the device and then the one
on the router within 60 seconds. The status LED on the router will flash three times if the device has been successfully added
to the network.
There are several ways to add a wireless device to your network. A "registrar" controls access to the wireless network and
only allows devices onto the wireless network if you have entered the PIN or pressed a special Wi-Fi Protected Setup button
on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u ' m P 56
amSung ireleSS outer Ser S anual age