Samsung CY-SWR1100 User Manual page 44

After specifying the QoS framework used in the QoS setup section, you can now create individual rules for scenarios that
require the use of traffic control and data priority manipulation.
You can configure the following parameters:
Checkbox:
Name:
Priority:
Protocol:
Local IP Range:
Remote IP Range:
Application Port:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
Check this option to enable the rule specified.
Enter a custom name for the rule being created here. This name is used for identification.
Select the appropriate priority requirement from the drop-down menu. You can choose
Highest, Higher, Normal, and Best Effort.
Select the protocol used for the application in the drop-down menu and it will automati-
cally place it in the Protocol field.
Enter the local IP range here. This is the IP range of you Local Area Network. The Router's
IP cannot be included in this range.
Enter the remote IP range here. This is the IP range of the public network from the Inter-
net Port side. To apply this rule to any IP addresses from the public side, enter the range
0.0.0.1 to 255.255.255.254.
Enter the application port number used here.
' m
S anual
P 44
age