Samsung CY-SWR1100 User Manual page 66

Use this section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Ad-
dress that you use to access the Web-based management interface. If you change the LAN IPv6 Address here, you may need
to adjust your PC's network settings to access the network again. You can use DHCP-PD to acquire a IPv6 prefix for the LAN
interface.
You can configure the following parameters:
Enable DHCP PD:
LAN IPv6 Address:
LAN IPv6 Link-Local Ad-
dress:
You can configure the following parameters:
Auto-Configuration:
Auto-Configuration Type:
Router Advertisement
Lifetime:
IPv6 Address Range
(Start):
IPv6 Address Range
(End):
IPv6 Address Lifetime:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
Select this option to enable DHCP PD.
Enter the LAN IPv6 address used here. This address must be in the '/64' subnet.
Displays the LAN IPv6 Link-Local address used here.
You can check this option to enable the auto-configuration feature.
You can select the auto-configuration type used here. Choose Stateless or Stateful
(DHCPv6).
This option is only available when the auto-configuration type is set to Stateless. Enter
the router advertisement lifetime value used here.
This option is only available when the auto-configuration type is set to Stateful. Enter the
start IPv6 Address of the DHCPv6 range for your local computers.
This option is only available when the auto-configuration type is set to Stateful. Enter the
end IPv6 Address of the DHCPv6 range for your local computers.
This option is only available when the auto-configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
' m
S anual
P 66
age