Samsung CY-SWR1100 User Manual page 67

IPv6 Connection Type: IPv6 in IPv4 Tunnel
In this section, you can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates
IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure.
You can configure the following parameters:
My IPv6 Connection is:
You can configure the following parameters:
Remote IPv4 Address:
Remote IPv6 Address:
Local IPv4 Address:
Local IPv6 Address:
Subnet Prefix Length:
You can configure the following parameters:
Obtain IPv6:
Use the following IPv6:
Primary DNS Server:
Secondary DNS Server:
You can configure the following parameters:
LAN IPv6 Address:
LAN IPv6 Link-Local:
S W r u
amSung ireleSS outer Ser
Select the IPv6 Connection Type used for this configuration here.
Enter the remote IPv4 address used here.
Enter the remote IPv6 address used here.
Enter the local IPv4 address used here.
Enter the local IPv6 address used here.
Enter the Subnet prefix length value used here.
Select this option to obtain the DNS Server addresses automatically.
Select this option to manually enter the DNS Server addresses used.
Enter the primary DNS Server address used here.
Enter the secondary DNS Server address used here.
Enter the LAN IPv6 address used here. This address must be in the '/64' subnet.
Displays the LAN IPv6 Link-Local address used here.
' m
S anual
P 67
age