System - Samsung CY-SWR1100 User Manual

This section allows you to manage the router's configuration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created.
You can configure the following parameters:
Save Settings To Local
Hard Drive:
Load Settings From Local
Hard Drive:
Restore To Factory Default
Settings:
Reboot The Device:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
Use this option to save the current router configuration settings to a file on the hard disk
of the computer you are using. First, click the Save button. A file dialog will appear allow-
ing you to select a file name for the settings and a location to saver them to.
Use this option to load previously saved router configuration settings. First, use the
Browse option to find a previously saved file of configuration settings. Then, click the
Upload Settings button below to transfer those settings to the router.
This option will restore all configuration settings to the settings that were in effect at the
time the router was shipped from the factory. Any settings that have not been saved will
be lost, including any rules that you have created. If you want to save the current router
configuration settings, use the Save button above.
Click to reboot the router.
' m
S anual
S
yStem
P 80
age