Network Filter - Samsung CY-SWR1100 User Manual

The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Addresses of
network adapters (network access cards, etc.) A MAC address is a unique ID assigned by the manufacturer to each network
adapter. You can configure this feature to ALLOW or DENY network/Internet access.
In the MAC Filtering Rules section, you can create and edit Network filter rules. This maximum number of rules you can
create is 24.
You can configure the following parameters:
Configure MAC Filtering:
Checkbox:
MAC Address:
DHCP Client List:
Schedule:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
n
etWork
From the drop down list, you can select Turn MAC Filtering OFF, Turn MAC Filtering ON
and ALLOW computers listed to access the network, or Turn MAC Filtering ON and DENY
computers listed to access the network .
Check the box on the left side to enable the Network Filter.
Enter the MAC address you would like to use in this filtering rule.
Select a DHCP client from the Computer Name drop-down menu and Click << to copy that
MAC Address.
The schedule of times when the Network Filter will be enabled. The schedule may be set
to Always, which will allow the particular service to always be enabled. Click the New
Schedule button to create your own times in the Schedules page.
' m
S anual
f
Ilter
P 45
age