Application Rules - Samsung CY-SWR1100 User Manual

Some applications, such as Internet gaming, video conferencing, Internet telephony and others, require muliple connections.
These applications have difficulties working through NAT (Network Address Translation). Special Applications make some of
these applications work with the router. If you need to run applications that require multiple connections, specify the port nor-
mally associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic.
On this page, you can create a set of application rules.
You can configure the following parameters:
Checkbox:
Name:
Application:
Port (Trigger):
Port (Firewall):
Protocol:
Schedule:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
a
PPlIcatIon
Check the box on the left side to enable the Application Rule.
Enter a name for the rule. You may select a predefined application from the Application
drop-down menu and Click <<.
Displays a list of predefined application to use in the rules.
This is the port used to trigger the application. It can be either a single port or a range of
ports.
This is the port number on the Internet side that will be used to access the application.
You may define a single port or a range of ports. You can use a comma to add multiple
ports or port ranges.
Select the protocol of the firewall port (TCP, UDP, or All).
The schedule of times when the Application Rule will be enabled. The schedule may be
set to Always, which will allow the particular service to always be enabled. You can create
your own times in the Schedules page.
' m
S anual
r
uleS
P 42
age