Samsung CY-SWR1100 User Manual page 38

You can configure the following parameters:
Enable DHCP Server:
DHCP IP Address Range:
DHCP Lease Time:
Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses
are outside of this range or you may have an IP conflict.
The DHCP Reservation List displays a list of DHCP clients whose MAC address have been locked to specific IP addresses
in the DHCP pool.
In the 'Number of Dynamic DHCP Clients' section, all the active DHCP clients will be displayed.
In the DHCP Reservation section, you can configure reserved IP address to selective DHCP clients by entering their MAC
addresses in the list along with the appropriate IP address.
You can configure the following parameters:
Checkbox:
Computer Name:
IP Address:
MAC Address:
S W r u
amSung ireleSS outer Ser
Check this box to enable the DHCP server on your router. Uncheck to disable this func-
tion.
Enter the starting and ending IP addresses for the DHCP server's IP assignment.
The length of time for the IP address lease. Enter the Lease time in minutes.
Check this box to enable the reservation.
Enter the computer name. Alternatively, select a computer that currently has a DHCP lease
from the drop down menu and Click << to automatically populate the Computer Name, IP
Address, and MAC Address fields.
Enter the IP address you want to assign to the computer or device. This IP Address must
be within the DHCP IP Address Range.
Enter the MAC address of the computer or device.
' m
S anual
P 38
age