Nokia IP40 User Manual page 86

7
Setting Up the Security Policy in IP40
7. Click Finish.
The new rule appears in the Firewall Rules page.
Table 16 Firewall Rule Fields
In this field...
Any Service
Standard
Service
Custom
Service
Protocol
Ports
Source
Destination
86
Do this...
Click this option to specify that the rule should apply to any service
Click this option to specify that the rule should apply to a specific
standard service
You must then select the desired service from the drop-down list
Click this option to specify that the rule should apply to a specific
non-standard service
The Protocol and Port Range fields are enabled. You must fill them
in.
Select the protocol (ESP, GRE, TCP, UDP or ANY) for which the
rule should apply
To specify the port range to which the rule applies, type the start
port number in the left text box, and the end port number in the
right text box
Note: If you do not enter a port range, the rule will apply to all
ports. If you enter only one port number, the range will include only
that port.
Select the source of the connections you want to allow/block
To specify an IP address, select Specified IP and type the desired
IP address in the text box
Select the destination of the connections you want to allow or
block.
To specify an IP address, select Specified IP and type the desired
IP address in the text box
Nokia IP40 User Guide