14
Using Managed Services
Selecting Protocols for Scanning
If you are locally managed, you can define which protocols should be scanned for viruses:
!
Email retrieving (POP3). If enabled, all incoming email in the POP3 protocol will be
scanned.
!
Email sending (SMTP). If enabled, all outgoing email will be scanned.
Protocols marked with check mark will be scanned, while those marked with cross mark will
not.
Note
If you are remotely managed, contact your Service Center to change these settings.
To enable virus scanning for a protocol
1. In the Protocols area, click on the check mark or cross mark next to the desired protocol.
2. Click Apply.
Temporarily Disabling Email Antivirus
If you are having problems sending or receiving email you can temporarily disable the Email
Antivirus service.
To temporarily disable Email Antivirus
1. Click Services in the main menu, and click the Email Antivirus tab.
The Email Antivirus page appears.
2. Click Snooze.
!
!
!
164
Email Antivirus is temporarily disabled for all internal network computers.
The Snooze button changes to Resume.
The Email Antivirus Off popup window opens.
Nokia IP40 User Guide