Direct Lan Connection; Cable Connection Settings - Nokia IP40 User Manual

! PPTP or PPPoE Dialer
Select the Internet connection method to use for connecting to the Internet and click Next.
Note
If you select PPTP or PPPoE dialer, do not use dial up software to connect to the Internet.
The IP40 does the PPPoE negotiation.

Direct LAN Connection

If you want to use a direct LAN connection to connect to the Internet, proceed as follows:
1. Select Direct LAN from the list of Internet connection methods and click Next.
A Connecting message appears followed by a Connected message.
Once connected, the wizard prompts you to register your details and set up your subscription
options, which vary from product to product.
Refer to
registering with Nokia Support Center and subscribing to additional services using the Setup
Wizard.
2. Follow the instructions until the wizard is done, and then click Finish
You are now connected to the Internect using a direct LAN connection.

Cable Connection Settings

If you selected cable modem connection in the previous procedure, the Host Name screen
appears.
Nokia IP40 User Guide
Chapter 3, "Getting Started,"
Configuring for Internet Connection
for information on configuring device time,
59