Viewing Diagnostics Summary - Nokia IP40 User Manual

The VPN Tunnels table includes the following columns:
Table 19 VPN Tunnels
Column
Site
Username
Encryption
Type
Established
Time
VPN
Gateway
You can refresh the table by refreshing the browser.

Viewing Diagnostics Summary

You can view the diagnostics summary for your device from IP40 GUI. The diagnostics
summary provides useful information about your device, such as Node Limit, Network Status,
Primary Network Status, Secondary Network Status, My Network Status, Setup State, Users
State, Security and Subscription Services. Apart from this, you can get the following basic
information about your IP40 from the diagnostics summary.
To view Diagnostics Summary
1. From the main menu, click on Setup > Tools.
The Tools page appears.
2. Click on the Diagnostics button, which is present on the right hand side.
3. The Diagnostics window pops up. A section of the diagnostics window displaying
information on Serial Number, Nokia Firmware Version, Firmware Version, Bootcode
Version, Hardware Type, Hardware Version, Uptime, Node Limit, Network Status has been
shown below.
Nokia IP40 User Guide
Information
The VPN site's name
The User logged on to the VPN site
The type of encryption used to secure the
connection, followed by the type of authentication
used to verify the user's identity.
This information is presented in the following format
- Encryption Type/ Authentication Type
The Time when the VPN Tunnel is established.
This information is presented in the following format
- Hour:Minute:Second
The IP Address of the VPN Gateway to which the
Tunnel is connected
Viewing Reports
127