Satellite X To Satellite X (Vpn Gateway To Gateway); Setting Up The Nokia Ip40 Satellite X - Nokia IP40 User Manual

Note
To configure the primary and secondary Check Point management stations, refer to the
Check Point Multiple Entry Point document.

Satellite X to Satellite X (VPN Gateway to Gateway)

The VPN configuration between an IP40 Satellite X and another IP40 Satellite X enables you to
establish site-to-site VPN connections between IP40 site-to-site VPN gateways.
Note
In this configuration, both IP40 Satellite X Site-to-Site VPN gateways must have a static IP
address.
The Figure below shows a sample implementation of the Satellite X to Satellite X solution with
three Satellite X devices. Each IP40 device acts as a Site-to-Site VPN gateway for a fully secure
network. The networks communicate through VPN connections.
Figure 9 Satellite X to Satellite X
Satellite
Ext: 66.93.53.4/22
Int: 192.168.10.1/22
192.168.10.1/22

Setting up the Nokia IP40 Satellite X

Configure a VPN tunnel between two IP40 Satellite X devices (site-to-site VPN).
To set up the IP40 Satellite X
1. Specify the IP address of IP40 Satellite X on the remote IP40 Satellite X.
2. Enter the Shared Secret (a password that is known to both of the IP40 Satellite X devices).
Nokia IP40 User Guide
Satellite
Ext: 66.93.53.5/22
192.168.20.0/22
Int: 192.168.20.1/22
Satellite
Ext: 66.93.53.3/22
Int: 192.168.12.1/22
192.168.12.0/22
00402
Site-to-Site VPNs
149