Changing Ip Addresses - Nokia IP40 User Manual

6
Managing Your Local Area Network
To enable or disable the DHCP server,
1. In the Navigation Bar, click Network > My Network.
The My Network page appears.
2. In the DHCP Server list, select Enabled or Disabled.
3. Click Apply.
4. If you do not have another DHCP server in your network, and your computers were
originally configured differently, do the following:
!
!

Changing IP Addresses

You can change the IP address of your IP40. You can also change the entire range of IP
addresses in your network using the IP40 Satellite X licenses. You might want to do this if, for
example, you are adding the IP40 to a large existing network and do not want the network IP
address range to change, or if you are using a DHCP server other than the IP40, that assigns
addresses within a different range.
If you change the IP address of your IP40, you might have to manually change the network
interface TCP/IP setting when you use static IP, or renew the DHCP lease when you use
Dynamic IP.
To change the IP addresses in your network
1. In the Navigation Bar, click Network > My Network.
2. Enter new values in the Internal Network Range fields.
3. To reset the network to its default settings, with the DHCP server enabled and the internal
network range is 192.168.10.1, click Default.
4. Click Apply. The following things happen:
72
Reconfigure all the computers on your network.
Use DHCP to disable the Obtain IP address automatically setting in the TCP/IP settings.
Nokia IP40 User Guide