System Logging Configuration; Network Utilities - Nokia IP40 User Manual

11
Configuring Device Functions
For advanced date and time configuration using the NTP server, refer IP40 CLI Reference
Guide.

System Logging Configuration

The Nokia IP40 supports local event logging, which can be viewed from Reports > Event Log.
Up to 100 events can be logged here. An external syslog server can also be configured using the
following method.
To configure an external Syslog server
1. Click Setup from the main menu, and select the Logging tab.
The Logging page appears.
2. Enter the IP address for the syslog server against the Syslog server field.
Note
The Syslog server can run either on a computer outside your network, or on a computer
inside your IP40 network.
3. Specify the port number where the syslog server will run. The default port number is 514.
To set the syslog server from the command-line
Use the following commands from the IP40 command-line interface to set the syslog server.
set syslog
Refer to IP40 CLI Reference Guide for more information on setting the Syslog server.

Network Utilities

You can use the following network utilities from the IP40 GUI:
114
address - Syslog server address
port - Syslog server port
Nokia IP40 User Guide