Cloning A Mac Address - Nokia IP40 User Manual

5
Connecting to the Internet using IP40
You can set the maximum transmission unit size (MTU). Nokia recommends that you leave this
field empty. However, to modify the default MTU, consult with your service center.
3. If you are not using automatic configuration of DNS servers, do the following:
a. Clear the Obtain DNS servers automatically check box.
b. Enter the Preferred DNS server IP address.
c. Enter the Alternate DNS server IP addres
4. Click Apply.
To use a PPTP connection
If using a PPTP connection, enter the following information:
1. Enter your Username and Password and confirm the Password.
2. Enter the service name as given by your Service Center.
3. Enter the IP address of the PPTP server as given by your Service Center.
4. Enter the IP address of the PPTP client as given by your Service Provider.
5. Select the PPTP client subnet as given by your Service Provider.
You can configure the MTU size. Nokia recommends that you leave this field empty.
Consult your Service Provider to modify the default MTU.
6. If you are not using automatic configuration of DNS servers, do the following:
a. Clear the Obtain DNS servers automatically check box.
b. Enter the Preferred DNS server IP address.
c. Enter the Alternate DNS server IP address.
7. Click Apply.

Cloning a MAC Address

A MAC address is a 12-digit identifier assigned to every network device. If your ISP restricts
connections to specific, recognized MAC addresses, you must clone a MAC address.
66 Nokia IP40 User Guide