Logging On To The Nokia Ip40 - Nokia IP40 User Manual

Refer to
connecting to service centers, and to
using subscription services

Logging On to the Nokia IP40

Once you exit from the Setup Wizard, the IP40 Welcome screen appears. The following section
shows how to log on subsequently.
To access the user interface of the IP40,
1. Open your Web browser, enter http://my.firewall.
Click Enter.
The Nokia IP40 initial login page appears.
2. Enter the password directly for the IP40 Tele 8 license.
For the IP40 Satellite X licenses, enter the username and password. If you are logging on for
the first time, you should use admin as the username.
Note
The default user name for all Nokia IP40 licenses is admin. For the IP40 Satellite X licenses,
you can define additional users. These additional users have separate username and
password. For the IP40 Tele 8 license, you can only logon with username admin. However,
you can change the password. The password in all cases should be five to eleven
alphanumeric characters.
You will need to define your password in two instances:
!
!
After the initial login, the Welcome screen appears. A sample Welcome screen is shown.
The Welcome screen displays the product identity of your device (Tele 8 or Satellite X).
Nokia IP40 User Guide
Managing large scale deployments of the Nokia IP40
At the initial Login
When you reset the device to defaults.
Chapter 14, "Using Managed Services,"
Making Initial Nokia IP40 Settings
on page 53 for information on
for information on
43