Nokia IP40 User Manual page 171

I cannot play a certain network game. What should I do?
! Turn the IP40 security to Low and try again.
If the game still does not work, set the computer you wish to play from to be the DMZ
!
server.
When you have finished playing the game make sure to clear the DMZ setting otherwise
!
your security might be compromised.
I have forgotten my password. What should I do?
Reset the IP40 to factory defaults using the Reset button as detailed in "Resetting the IP40 to
factory defaults." Note that this will erase all your settings.
I cannot connect to a VPN site using IP40 Satellite or IP40 Tele. What should I do?
Check whether there is a problem with your VPN client:
Do one of the following:
1. If you are using IP40 Tele, add the demo Check Point VPN site, using the procedure
"Adding and Editing VPN Sites using IP40 Tele," as follows:
a. In the VPN Gateway Address dialog box, enter 207.40.230.20 in the VPN Gateway field.
b. In the VPN Network Configuration dialog box, select Download Configuration.
2. If you are using IP Satellite, add the demo Check Point VPN site, using the procedure
Adding and Editing VPN Sites using IP40 Tele, as follows:
a. In the Welcome to the VPN Site Wizard dialog box, select Remote Access VPN.
b. In the VPN Gateway Address dialog box, enter 207.40.230.20 in the VPN Gateway field.
c. In the VPN Network Configuration dialog box, select Download Configuration.
3. Log on to the demo site, using "vpndemo" as your username and password.
4. Surf to http://207.40.230.22
The Check Point VPN-1 SecuRemote Demo Site should open and inform you that you
successfully created a VPN tunnel.
I changed the network settings to incorrect values and am unable to correct my error.
What should I do?
Reset the network to its default settings using the button on the back of the IP40 unit.
I am using the IP40 with another DSL/Cable router, and I am having problems with some
applications.
The IP40 performs Network Address Translation (NAT). It is possible to use the IP40 behind
another device that performs NAT, such as a DSL router or Wireless router, but the device will
block all incoming connections from reaching your IP40.
To fix this problem, do ONE of the following. (The solutions are listed in order of preference.)
! Consider whether you really need the router. The IP40 can be used as a replacement for your
router, unless you need it for some additional functionality that it provides, such as Wireless
access.
Nokia IP40 User Guide
Frequently Asked Questions
171