Diode Assembly (Greensmaster 3420)
The Greensmaster 3420 wire harness contains a diode
that is used for circuit protection from voltage spikes
when the engine starter solenoid is de--energized. The
diode plugs into the wire harness in the engine area (see
Greensmaster 3420 Wire Harness Drawing in Chapter
10 -- Foldout Drawings).
Diode Test
The diode (Fig. 90) can be individually tested using a
digital multimeter (diode test or ohms setting) and the
table to the right.
Electrical System
1
1. Diode
2. Male terminal
Multimeter
Red Lead (+)
on Terminal
Female
Male
Page 6 - - 70
Figure 90
3. Female terminal
Multimeter
Black Lead (- -)
Continuity
on Terminal
Male
Female
Greensmaster 3320/3420
2
3
YES
NO