Tank Mount Plate Assembly - Toro Greensmaster TriFlex 3320/3420 Service Manual

Tank Mount Plate Assembly

GREENSMASTER 3320
1
2
3
3
RIGHT
FRONT
1. Tank mount plate assembly (GR3320)
2. Suction hose (to gear pump)
3. Flange head screw (2 used)
4. Flat washer (2 used)
NOTE: For access to fasteners that secure hydraulic
reservoir and fuel tank and also to access machine com-
ponents at rear of machine (e.g. steering cylinder, rear
steering fork), the tank mount plate assembly (hydraulic
reservoir, fuel tank and tank mount plate) can be raised
and supported. If necessary, the complete tank mount
plate assembly can be removed from the machine.
Chassis
4
5
6
Figure 16
5. Flange head screw (2 used)
6. Frame
7. Tank mount plate assembly (GR3420)
8. Suction hose (to gear pump)
Before disconnecting any hydraulic hoses, read
and become familiar with General Precautions
for Removing and Installing Hydraulic System
Components in the Service and Repairs section
of Chapter 5 - - Hydraulic System.
Page 7 - - 18
GREENSMASTER 3420
7
8
9
9. Frame
10. Flange head screw (4 used)
11. Clip (2 used)
CAUTION
10
11
10
Greensmaster 3320/3420