General Information; General Information; Operator's Manuals; Opening Electrical Circuit To Cutting Units - Toro Greensmaster TriFlex 3320/3420 Service Manual

General Information

Operator's Manuals

The Traction Unit and Cutting Unit Operator's Manuals
provide information regarding the operation, general
maintenance procedures and maintenance intervals for
your Greensmaster TriFlex Hybrid machine. Refer to
these publications for additional information when ser-
vicing the machine.

Opening Electrical Circuit to Cutting Units

CAUTION
Before installing, removing or servicing the cut-
ting units, separate the cutting unit power dis-
connect. This will prevent unexpected cutting
unit operation.
Before installing, removing or working on the cutting
units, disconnect the cutting units from the electrical
power supply by separating the cutting unit power dis-
connect couplers (Fig. 1). The couplers are located at
the base of the rollover bar on the left side of the traction
unit. Connect the couplers together before operating the
machine.
Greensmaster 3320/3420
2
1. Coupler
Page 7 - - 3
1
Figure 1
2. Stationary coupler
Chassis