Generator Assembly Service - Toro Greensmaster TriFlex 3320/3420 Service Manual

Generator Assembly Service

170 to 190 in- -lb
(19.3 to 21.3 N- -m)
75 in- -lb
(8.5 N- -m)
15 to 25 in- -lb
(1.8 to 2.8 N- -m)
17
18
19
1. Generator assembly
2. Plug (2 used)
3. Flocked seal
4. Wave washer
5. Retaining ring
6. Cap screw (2 used)
7. Flat washer (2 used)
8. Washer head screw (6 used)
Disassembly (Fig. 107)
1. Remove fan screen (item 20) from generator fan.
2. Remove generator cover (item 17) from generator
assembly.
3. Remove access cover (item 12) and cover gasket
(item 11) from controller. Discard cover gasket.
Electrical System
70 to 80 in- -lb
(8.0 to 9.0 N- -m)
11
12
13
14
15
16
8
20
9. Controller assembly
10. Flange nut (2 used)
11. Cover gasket
12. Access cover
13. Washer head screw (2 used)
14. Flange head screw (3 used)
15. Collar
16. Flange head screw
8
9
10
23
21
70 to 80 in- -lb
(8.0 to 9.0 N- -m)
Figure 107
4. Carefully remove generator and controller harness
connectors from controller opening. Note position of
connectors and wire harnesses for assembly purposes.
Unplug connectors.
5. Remove three (3) flange head screws (item 14) that
secure generator stator conductors to controller con-
nectors.
Page 6 - - 92
6
20 to 26 ft- -lb
(28 to 35 N- -m)
7
2
24
3
2
1
22
20 to 26 ft- -lb
(28 to 35 N- -m)
17. Generator cover
18. Torx screw (4 used)
19. Flat washer (4 used)
20. Fan screen
21. Generator fan
22. Woodruff key
23. Button head screw (2 used)
24. O- -ring
Greensmaster 3320/3420
5
4