General Information; Installation Instructions; Opening Electrical Circuit To Cutting Units - Toro Greensmaster TriFlex 3320/3420 Service Manual

General Information

Installation Instructions

The installation instructions for the groomer provide in-
formation regarding the operation, general mainte-
nance procedures and maintenance intervals for the
groomer assembly on your Greensmaster TriFlex Hy-
brid machine. Refer to this publication for additional in-
formation when servicing the groomer assembly.

Opening Electrical Circuit to Cutting Units

CAUTION
Before installing, removing or servicing the cut-
ting units, separate the cutting unit power dis-
connect. This will prevent unexpected cutting
unit operation.
Before installing, removing or working on the cutting
units, disconnect the cutting units from the electrical
power supply by separating the cutting unit power dis-
connect couplers (Fig. 1). The couplers are located at
the base of the rollover bar on the left side of the traction
unit. Connect the couplers together before operating the
machine.
Greensmaster 3320/3420
2
1. Coupler
Page 9 - - 3
1
Figure 1
2. Stationary coupler
Groomer