Ff4 2: Soft Keys On Display Phones - Panasonic DBS-576 Technical Manual

Section 400 programming
Hide thumbs Also See for DBS-576:
Table of Contents

Advertisement

Section 400-Programming
Introduction

FF4 2: Soft Keys on Display Phones

Notes:
0
System
This address applies to both Large-Display and Small-Display phones.
Configuration
The extension's Phone Type must be set to "1" (for Digital Key Phone - default).
See Phone Type (pg. 3-3): FF3 0 BSSC 00 Hold (1-3) Hold.
FF1
System
Soft Key Feature Assignment
FF2
(all CPCs) - Version 1.0 or higher
Trunks
Assign Feature Codes to the soft keys on Large-Display and Small-Display phones.
FF3
Extensions
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
FF4
C=Circuit no. 1-8
FF-/Soft Keys
FF5
Groups
Notes:
These features will apply in the following modes:
On Large-Display phones, press the
FF6
features are displayed at a time, and are executable by pressing the soft keys on the left side of the
TRS/ARS
LCD. During Dial Tone or Dialing (which can have up to 10 feature assignments), press the
keys to toggle between the 2 screens of 5 functions each. Press the
PREV
On Small-Display phones, activate Variable Mode (default code = *61, or press the FF-key
FF7
programmed with this code). One feature at a time is displayed, and can be executed by pressing the
Applications
EXEC (R) or (L). Use the
FF-key again to exit.
FF8
Maintenance
Related Programming:
Appendix A
Dial Plan Assignment (pg. 3-27) to extensions
Appendix B
576-13-400
FF4 2 BSSC 0 (01-30) Hold (Code) Hold
Soft Key Feature No. 01-30:
01-10 = during Dial Tone or Dialing
11-15 = during Ringback Tone
16-20 = during Busy Tone
21-25 = during OHVA/Receive
26-30 = during Talk
(See figures, next page, for soft key numbering on phones)
VOLUME
Variable Mode ON:
!#*   +*
J -'!K
(FF-key: lit red)
DBS 576 (USA) issued 05/20/98
FF4: FF-Key/Soft Key Feature Assignment
!  2 ;=
soft key to access these features. Up to 5
key to change the feature name to be displayed. Press the
Variable Mode OFF:
!#*   +!!

(FF-key: unlit)
FF3 0 BSSC 09 Hold (1 or 2) Hold

$
"-'!  
Feature Code Assignment
(see pg. 4-2)
default: [no assignment]
key to exit.
MENU
$!'
Page 4-19
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
or
NEXT
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B

Advertisement

Table of Contents
loading

Table of Contents