Panasonic DBS-576 Technical Manual page 331

Section 400-Programming
Notes:
Introduction
This Trunk COS Assignment controls the ring tone for incoming calls on this trunk - CO ring tone,
intercom ring tone, or (for DIL trunks) a specific ring pattern. The Trunk COS also controls various
network settings. See FF1 0 04: Trunk COS Definitions (pg. 1-75).
0
System
Related Programming:
Configuration
Trunk COS: Incoming Ring Tone Source (pg. 1-75)
Trunk COS: DID/DNIS Table (pg. 1-77)
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78)
FF1
Trunk COS: DISA ID Verification (pg. 1-79)
System
Ring Pattern (pg. 2-63)
Day1/Day2/Night Ring Type/Destination (pg. 2-75)
FF2
Trunks
Calling Number Area Code
FF3
(all CPCs) - Version 1.0 or higher
Extensions
Assign a Calling Number Area Code to the ISDN trunk.
FF4
FF-/Soft Keys
FF5
Groups
Notes:
FF6
This Calling Number Area Code will be sent to the CO for outbound calls on the ISDN trunk, along
TRS/ARS
with other Calling Number digits (if assigned) in the following sequence:

   
 
  
     
FF7
Related Programming:
Applications
Calling Number Send (pg. 2-72)
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF2 1 BSSC 02 02 Hold (0-12) Hold
FF2 1 BSSC
BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
FF2 1 BSSC 03 12 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
FF1 0 04 (00-15) 01 Hold (0 or 1) Hold
FF1 0 04 (00-15) 04 Hold (0 or 1) Hold
FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
FF1 0 04 (00-15) 06 Hold (0 or 1) Hold
FF2 1 BSSC 04 (0 thru 5) ...
09 0 Hold (up to 6 digits) Hold
Calling Number Area Code
(max. 6 digits)
default: [no assignment]
FF2: Trunk Programming (ISDN)
$ &
/ ! 
Page 2-83
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B