Panasonic DBS-576 Technical Manual page 263

Section 400-Programming
Related Programming:
Introduction
DTMF ON: Pattern #1 (pg. 1-123)
DTMF OFF: Pattern #1 (pg. 1-124)
DTMF ON/OFF: Pattern #2 (pg. 1-125)
DTMF ON/OFF: Pattern #3 (pg. 1-126)
0
DTMF/Dial Pulse Dialing (pg. 2-17)
System
Configuration
Disconnect Supervision Timer
FF1
(all CPCs) - Version 1.0 or higher
System
Set how long the system will wait after detecting a drop in voltage from the CO,
before recognizing it as a valid disconnect signal.
FF2
Trunks
BSSC: Analog (CO) Trunk Position
FF3
B=Cabinet no. 1-6
Extensions
SS=Slot no. 01-12
C=Circuit no. 1-8
FF4
FF-/Soft Keys
Notes:
FF5
Groups
Related Programming:
Trunk Signal Type (pg. 2-8)
FF6
TRS/ARS
Guard Timer for Outbound Calls
(all CPCs) - Version 1.0 or higher
FF7
Set how long the system guards the trunk after a call is disconnected. The
Applications
purpose of guarding the trunk is to prevent "glare" (collision between an
incoming and outgoing call).
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF1 1 01 0016 Hold (1-255) Hold
FF1 1 01 0017 Hold (1-255) Hold
FF2 0 BSSC
FF2 0 BSSC 01 00 Hold (0-3) Hold
FF2 0 BSSC
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
FF1 1 01 0018 Hold (1-255) Hold
FF1 1 01 0019 Hold (1-255) Hold
FF2 0 BSSC 02 00 Hold (0 or 1) Hold
01 15 Hold (0-3) Hold
if Trunk Signaling is ...
Loop Start/Ground Start:
0=281 ms (default)
1=531 ms
2=781 ms
3=1032 ms (1.032 seconds)
01 16 Hold (0-3) Hold
FF2: Trunk Programming (Analog CO)
'!' %
DID:
0=96 ms (default)
1=144 ms
2=240 ms
3=1500 ms (1.500 seconds)
1- %
0=500 ms (.5 seconds) (default)
1=1000 ms (1 second)
2=1500 ms (1.5 seconds)
3=2000 ms (2 seconds)
Introduction
0
System
Configuration
$
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
$ 
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-15