Panasonic DBS-576 Technical Manual page 415

Section 400-Programming
Introduction
D-Channel Interface ID Code
(all CPCs) - Version 1.0 or higher
When Common D-Channel (see previous address) is used, identify the Interface
0
ID code (supplied by the CO) that will be used for common D-channel control.
System
Configuration
FF1
System
FF2
Trunks
Notes:
The Common D-Channel Position must be set for the port before this address can be entered. If
Common D-Channel Position is cleared, this address will automatically be cleared also.
FF3
Extensions
Related Programming:
Common D-Channel Position (pg. 3-28)
FF4
FF-/Soft Keys
Extension Number Assignment
FF5
(all CPCs) - Version 1.0 or higher
Groups
Assign an extension number to the ISDN port only.
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
Maintenance
Related Programming:
Appendix A
Appendix B
576-13-400
FF3 1 BSSC 00 1 Hold (1-127) Hold
BSSC: Extension Port position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=PRI Circuit no. 1
FF3 1 BSSC 01 Hold (0-9999) Hold
BSSC: Extension Port position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
DBS 576 (USA) issued 05/20/98
D-Channel Interface ID Code (max. 3 digits)
default: [no assignment]
FF3 1 BSSC 00 0 Hold (BSSC) Hold
Extension Number of ISDN Port
default: [no assignment]
FF3: Extension Programming
$
'9 0" ! 
$
*:% )-8
Page 3-29
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B