Forced Account Codes - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction
MCO Prime Line
(all CPCs) - Version 1.0 or higher
Enable/Disable the MCO Prime Line feature on the extension.
0
System
Configuration
FF1
System
FF2
Notes:
Trunks
MCO Prime Line: When the user picks up the handset (ON/OFF not affected; it always gets intercom
dial tone), the 1st-priority MCO group is picked up automatically.
FF3
Extensions
Related Programming:
FF1 3: MCO Access in Tenant Groups (pg. 1-163)
FF4
FF-/Soft Keys

Forced Account Codes

(all CPCs) - Version 1.0 or higher
FF5
Enable/Disable "Forced" entry of Account Codes for calls on this extension.
Groups
FF6
TRS/ARS
FF7
Applications
Notes:
Account Codes: The user dials the feature code for Account Code Entry (#8 by default), the Account
FF8
Code (1-10 digits long), and # before dialing an outbound call. Or, during an inbound call, the user dials
AUTO # [Account Code] #. Account Codes are useful for allocating telephone expenses on SMDR
Maintenance
reports. They are also useful (as Forced, Not Forced, Verified, or Unverified) for overriding the
extension's TRS Class for outbound calls that are "exceptions to the rule," as shown in the table below:
Appendix A
Appendix B
576-13-400
FF3 0 BSSC 04 23 Hold (0 or 1) Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF3 0 BSSC 04 24 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
FF3: Extension Programming
2# $ '
0=Disable MCO Prime Line. (default)
1=Enable MCO Prime Line.
"!' /
(0 or 1) Hold
0=Disabled/Not Forced (default)
1=Enabled/Forced
Introduction
$ 
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
$  
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 3-21