Panasonic DBS-576 Technical Manual page 172
Section 400 programming
Hide thumbs
Also See for DBS-576:
- Technical manual (376 pages) ,
- Manual (362 pages) ,
- User manual (100 pages)
Table of Contents
Advertisement
FF1: System Programming
Related Programming:
Introduction
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)
FLASH (Code) Hold
Call-Forward ID Codes for Voice Mail (pg. 8-51)
Hold
0
System
Configuration
VM Transfer Code #1: Suffix
FF1
(all CPCs) - Version 1.0 or higher
System
Assign a suffix that will be automatically dialed after VM Transfer Code #1 (74 + nnnn)
when transferring a call directly to voice mail (3rd-party).
FF2
Trunks
NOTE: Enter a Pause in this address by
pressing Soft Key #4 on a small-display phone,
FF3
or "PAUSE" soft key on a large-display phone.
Extensions
Notes:
FF4
Two different Transfer Keys can be programmed for 3rd-party Voice Mail systems. Transfer Code #1
(74 + nnnn) transfers a call to a specific voice mail port. Transfer Code #2 (75 + nnnn) transfers a call to
FF-/Soft Keys
the Voice Mail pilot number. See FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s)
(pg. 4-7) for instructions on programming both Transfer Keys.
FF5
Related Programming:
Groups
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)
FLASH (Code) Hold
Call-Forward ID Codes for Voice Mail (pg. 8-51)
FF6
Hold
TRS/ARS
FF7
VM Transfer Code #2: Prefix
Applications
(all CPCs) - Version 1.0 or higher
Assign a prefix that will be automatically dialed in front of VM Transfer Code #2 (75 + nnnn)
when transferring a call directly to voice mail (3rd-party).
FF8
Maintenance
NOTE: Enter a Pause in this address by
pressing Soft Key #4 on a small-display phone,
or "PAUSE" soft key on a large-display phone.
Appendix A
Appendix B
Page 1-110
FF1 0 24 0002 Hold (up to 8 char.) Hold
FF1 0 24 0003 Hold (up to 8 char.) Hold
DBS 576 (USA) issued 05/20/98
FF4 0 BSSC 0 (01-32) Hold
FF8 1 05 Hold Hold (Ext.No.) Hold FLASH (up to 16 char.)
VM Transfer Code #1 Suffix (up to 8 characters,
including 0-9, , #, and Pause)
default: [no assignment]
FF4 0 BSSC 0 (01-32) Hold
FF8 1 05 Hold Hold (Ext.No.) Hold FLASH (up to 16 char.)
VM Transfer Code #2 Prefix (up to 8 characters,
including 0-9, , #, and Pause)
default: [no assignment]
Section 400-Programming
&2 %" 0- +
&2 %" 0$ +
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Advertisement
Table of Contents
