Panasonic DBS-576 Technical Manual page 268

FF2: Trunk Programming (Analog CO)
Introduction
Auto-Repeat Dial
(all CPCs) - Version 1.0 or higher
Enable/Disable Auto-Repeat Dialing on this trunk.
0
System
Configuration
FF1
BSSC: Analog (CO) Trunk Position
System
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF2
Notes:
Trunks
Auto-Repeat Dial: Dial an outside call. If busy tone is received, press REDIAL to have the system
automatically redial the number at set intervals (max. 15 times) until the called party answers or the user
hangs up.
FF3
Extensions
Related Programming:
Flash Timer for Auto-Repeat Dial (pg. 1-117)
FF4
FF-/Soft Keys
DTMF After Answer (Link Control)
(all CPCs) - Version 1.0 or higher
FF5
For calls on this trunk using pushbutton (DTMF) SLT phones, set whether
Groups
DTMF signals can be sent through the system after the called party answers.
FF6
TRS/ARS
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
FF7
SS=Slot no. 01-12
Applications
C=Circuit no. 1-8
Notes:
FF8
Maintenance
Set this address to "1" (One-Way Link) to prevent double-dialing -- making an outgoing call on the
same trunk after the called party hangs up, thus bypassing TRS restrictions.
Related Programming:
DTMF/Dial Pulse Dialing (pg. 2-17)
Appendix A
Appendix B
Page 2-20
FF2 0 BSSC 02 05 Hold (0 or 1) Hold
FF2 0 BSSC 02 06 Hold (0 or 1) Hold
FF2 0 BSSC 02 00 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
0=Do not allow Auto-Repeat Dialing.
1=Allow Auto-Repeat Dialing. (default)
FF1 1 01 0003 Hold (1-255) Hold
0=Two-Way Link: DTMF path open
both ways. (default)
1=One-Way Link: No DTMF signaling
after the called party answers.
Section 400-Programming
$
/-! 6 ,
$ 
54 !!,
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B