Panasonic DBS-576 Technical Manual page 122

FF1: System Programming
Introduction
1.
Extension COS: Trunk Queuing
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
0
use the Trunk Queuing feature.
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
Notes:
Trunk Queuing: Dial a trunk access code to seize a trunk. If you hear busy tone instead, dial the Trunk
FF4
Queuing code and hang up. Your phone will issue an alert tone when the trunk becomes available. Pick
up the handset to accept it (you'll hear CO dial tone in the receiver).
FF-/Soft Keys
If the ARS/LCR Setting for the system is disabled, Trunk Queuing for MCO-1 is available.
FF5
Related Programming:
Groups
ARS/LCR Setting (pg. 1-27)
Extension COS: Direct Trunk Access (pg. 1-46)
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 1-60
FF1 0 03 (00-15) 32 Hold (0 or 1) Hold
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
FF1 0 02 0010 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
0=Allow Trunk Queuing. (default)
1=Do not allow Trunk Queuing.
FF1 0 03 (00-15) 13 Hold (0 or 1) Hold
Section 400-Programming
))%3 D--
<))=#   >
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B