Panasonic DBS-576 Technical Manual page 396

FF3: Extension Programming
Introduction
Auto Camp-On Receive
(all CPCs) - Version 1.0 or higher
Enable/Disable the ability of other extensions to automatically "camp" onto
0
this (busy) extension simply by calling it.
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Related Programming:
Extensions
Extension COS: Manual Camp-On Send (pg. 1-57)
Extension COS: Manual Camp-On Receive (pg. 1-58)
FF4
FF-/Soft Keys
CO Off-Hook Signal
(all CPCs) - Version 1.0 or higher
FF5
Set whether the extension phone will indicate a second multiple-incoming call
Groups
while the first call is ringing on the trunk key.
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
Digital key phones indicate a second multiple-incoming call with a "beep" on speaker. SLT phones
Maintenance
"beep" in receiver.
Multiple Incoming: An incoming trunk call can ring on multiple extensions that have an FF-key line
appearance for the trunk (see Trunk FF-Key addresses in FF4).
The destination extensions for receiving Multiple Incoming trunks are assigned in FF4.
Appendix A
Appendix B
Page 3-10
FF3 0 BSSC 04 04 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF3 0 BSSC 04 05 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
(0 or 1) Hold
0=Do not allow Auto Camp-On Receive.
(default)
1=Allow Auto Camp-On Receive.
FF1 0 03 (00-15) 28 Hold (0 or 1) Hold
FF1 0 03 (00-15) 29 Hold (0 or 1) Hold
(0 or 1) Hold
0=Do not ring for another multiple-
incoming call.
1=Ring for another multiple-incoming
call. (default)
Section 400-Programming
$  
/-! 6 #
$ 
# .!!4 ,
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B