Panasonic DBS-576 Technical Manual page 420

FF3: Extension Programming
Introduction
Called Number Indication
(all CPCs) - Version 1.0 or higher
For incoming calls, set whether the system will send the called party's number
0
to the ISDN terminal.
System
Configuration
FF1
System
FF2
Trunks
Notes:
This must be set to "1" (Called-number indication) when using S-Point DID (parallel connection).
FF3
Extensions
Related Programming:
DID Dialing to ISDN "S" Point (pg. 1-172)
Connection Type (pg. 3-30) for ISDN extensions
FF4
FF-/Soft Keys
FF5
Groups
Called Sub-Address Indication
(all CPCs) - Version 1.0 or higher
For incoming calls, set whether the PRI/BRI card will send the sub-address that
FF6
identifies the originating terminal, to the ISDN extension.
TRS/ARS
FF7
Applications
BSSC: Extension Port position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
FF8
Maintenance
Notes:
Appendix A
Related Programming:
Appendix B
Page 3-34
FF3 1 BSSC 03 03 Hold (0 or 1) Hold
BSSC: Extension Port position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
FF3 1 BSSC 03 04 Hold (0 or 1) Hold
or 1 (PRI)
DBS 576 (USA) issued 05/20/98
0=No called-number indication. (default)
1=Called-number indication.
FF1 4 05 (0001-0192) Hold (setting) Hold
FF3 1 BSSC 02 00 Hold (0 or 1) Hold
0=No sub-address indication. (default)
1=Sub-address indication.
Section 400-Programming
$
,, )"#
$ 
-8 /  )"#
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B