Table Intro-1. Auto-Configuration Settings For Code Rotary Switch Set To "1" - Panasonic DBS-576 Technical Manual

Section 400 programming

Hide thumbs Also See for DBS-576:

Table of Contents

Section 400-Programming

Introduction

Table Intro-1. Auto-Configuration settings for CODE Rotary Switch set to "1"

Configuration

FF-/Soft Keys

FF-Key Assignments: On the auto-configured extensions, FF1 = CO-1, FF2 = CO-2, ... FF32 = CO-32.

Ringing: On Extensions 100 and 101, CO-1 thru CO-32 will ring the extension for incoming calls.

EXT Assignments: Can be either AEC or DEC cards. The system will automatically detect these cards when they

are installed.

Built-In VM (in Patterns 2 and 5): VPU Ports 1-8 are assigned Extension Nos. 600-607, and included in Hunt

Group #1. Hunting method is Pilot Distributed. However, the Hunt Group's pilot number is not assigned.

Pattern 2: Valid, but not intended for the U.S. market. If used, be sure to change Free Slot 5's card assignment

(Built-In VM's VSSC Card always goes in Free Slot 11).

Applications

10. After the Auto-Configuration process is complete, change the CODE rotary

switch back to "2" (to avoid accidental memory erasure in the future).

VPU Ext.600-603,

in Hunt Group 1

DBS 576 (USA) issued 05/20/98

-- Free Slots --

Introduction to DBS 576 Programming

VPU Ext.600-607,

in Hunt Group 1

Introduction

Configuration

FF-/Soft Keys

Applications